*Click here to see an expanded version of publication list in the university database.

*Click here to access the PDFs of major journal papers.

2024

  • (Award)Y. Yamamuro:Fumiko Yonezawa Award 2023,2024/3/26.
  • (Award)Y. Ueda:Award of Head of Multidisciplinary and Design Science,2024/3/26.
  • (Award)A. Otani:Excellent Graduation Research Award,2024/3/25.
  • (Award)A. Otani:Kito-Award 2023,2024/3/25.
  • (Award)R. Kawakami:JSPE Company Award from DMG-mori,2024/3/12.
  • (Award)M. Watanabe:JSPE Best Paper Award,2024/3/12.
  • (Award)A. Otani:Best Poster Presentation Award, ATF 2024 2024/3/8.
  • H. An, H. Huang, P. Xu, B. Liu, H. An, Y. Qian, J. Yan: Surface quality and mechanical property evolution of laser nitrided Zr-based metallic glass induced by laser shock flattening, Vacuum, 224(2024), 113193.
  • H. An, Y. Qian, L. Zhang, Z. Zhang, H. Huang, J. Yan: On the surface characteristics and removability of RB-SiC composite processed by nanosecond pulsed laser, Composites Part A, 180(2024), 108082.
  • F. Brüssel, W. Huang, J. Yan: Investigation of failure modes and material structural responses of nanographite coatings on single-crystal silicon by nanoscratching, Tribology International, 193(2024), 109349.
  • Y. Yamamuro, T. Shimoyama, H. Nagata, J. Yan: Effect of dopant concentration on femtosecond pulsed laser irradiation of yttria-stabilized zirconia for generating nanopores, Journal of Alloys and Compounds, 980(2024), 173596.
  • J. Hong, H. Huang, L. Zhang, Z. Zhang, M. Jiang, J. Yan: Laser polishing and simultaneous hardening of the electrical discharge machined Zr-based metallic glass surface, Materials & Design, 237(2024), 112599.

2023

  • (Award)J. Yan:IJEM Best Editor Award, 2023/12.
  • (Award)Y. Yamamuro:JSME Women of the Future Award, 2023/12/1.
  • (Award)T. Hashimoto:CJUMP Best Paper Award, 2023/10/24.
  • (Award)B. Watkins:CJUMP Best Paper Award, 2023/10/24.
  • (Award)R. Niino:CJUMP Best Presentation Award, 2023/10/24.
  • (Award)L. Zhang:JSPE Best Paper Award, 2023/3/15.
  • (Award)Y. Sato:IJEM2022 Best Paper Award, 2023/3/10.
  • (Award)M. Wada:Poster Presentation Award, ATF 2023 2023/3/9.
  • (Award)Y. Konishi:Best Poster Presentation Award, ATF 2023 2023/3/9.
  • (Award)Y. Ueda:Young Researcher Award, JSME 2022 2022/12/2.
  • T. Tsuchida, W. Huang, J. Yan: Surface conditioning of zirconia ceramic by enhanced ultrasonic vibration-assisted burnishing, Production Engineering, https://doi.org/10.1007/s11740-023-01242-2.
  • Y. Yamamuro, T. Shimoyama, H. Nagata, J. Yan: Femtosecond Pulsed Laser Irradiation of Zirconia for Embedding Silver Nanoparticles in Surface Nanopores, Applied sciences, 13(2023), 13108.
  • M. Cui, H. Huang, H. Wu, L. Zhang, J. Yan: Achieving superhydrophobicity of Zr-based metallic glass surface with anti-corrosion and anti-icing properties by nanosecond laser ablation and subsequent heat treatment, Surface & Coatings Technology, 475(2023), 130159.
  • C. Wang, H. Huang, H. Wu, J. Hong, L. Zhang, J. Yan: Ultra-low wear of titanium alloy surface under lubricated conditions achieved by laser texturing and simultaneous nitriding, Surface & Coatings Technology, 474(2023), 130083.
  • W. Huang, K. Nagayama, J. Yan: Fabrication of microlens arrays on single-crystal CaF2 by ultraprecision diamond turning, Journal of Materials Processing Tech., 321(2023), 118133.
  • W. Huang, J. Yan: Mechanisms of tool-workpiece interaction in ultraprecision diamond turning of single-crystal SiC for curved microstructures, International Journal of Machine Tools and Manufacture, 191 (2023), 104063.
  • S. Tanikawa, Y. Sato, J. Yan: A novel calibration method for angular misalignment in independently controlled fast tool servo-based diamond turning, Precision Engineering, 83 (2023), 216-227.
  • D. Kitagawa, T. Meshram, J. Yan: Microgrooving of ferrous metals by using cBN tools with laser-modified edges, Journal of the Japan Society for Abrasive Technology, 67, 6 (2023) 341-346.
  • C. He, J. Yan, S. Wang, S. Zhang, G. Chen, C. Ren: A theoretical and deep learning hybrid model for predicting surface roughness of diamond-turned polycrystalline materials, International Journal of Extreme Manufacturing, 5 (2023) 035102.
  • K. Minami, K. Kobinata, J. Yan: Multilayer Graphene‐Coated Silicon Carbide Nanowire Formation Under Defocused Laser Irradiation, Nanomanufacturing and Metrology, https://doi.org/10.1007/s41871-023-00203-8.
  • T. Meshram, J. Yan: Formation of Laser-Induced Periodic Surface Structures on Reaction-Bonded Silicon Carbide by Femtosecond Pulsed Laser Irradiation, Nanomanufacturing and Metrology, https://doi.org/10.1007/s41871-023-00184-8.

2022

  • (Award)Y. Yamamuro:Young Researcher Award, ICPE 2022 2022/12/2.
  • (Award)D. Kitagawa:Outstanding Presentation Award, Abrasive Technology Conference 2022/10/28.
  • (Award)N. Kasamo:Outstanding Presentation Award, PRESM 2022 2022/08/26.
  • (Award)K. Minami:Best Presentation Award, Conference of JSPE 2022 2022/06/14.
  • (Award)Y. Sato:Young Fellow Award(JSPE), 2022/04/15.
  • (Award)W. Huang:Fujiwara Prize, Graduate School of Science and Technology, Keio University, 2022/3/28.
  • (Award)A. Nakajima:Excellent Research Award (Master), School of Integrated Design Engineering, Graduate School of Science and Technology, Keio University, 2022/3/28.
  • (Award)Y. Sato:CJUMP2022 Best Paper Award, 2022/3/25-27.
  • (Award)Y. Ueda:Excellent Presentation Award, 29th Conference of JSPE Student Member Graduation Research, 2022/3/15.
  • (Award)M. Shimizu:Best Presentation Award, 29th Conference of JSPE Student Member Graduation Research, 2022/3/15.
  • (Award)N. Kasamo:Best Presentation Award, JSAT-ATF 2022, 2022/3/4.
  • (Award)R. Niino:Poster Presentation Award, JSAT-ATF 2022, 2022/3/4.
  • Y. Yamamuro, T. Shimoyama, J. Yan: Generation of nanopore structures in yttria-stabilized zirconia by femtosecond pulsed laser irradiation, Journal of Materials Research and Technology, 23 (2023), 1155-1176.
  • W. Huang, J. Yan: Effect of tool geometry on ultraprecision machining of soft-brittle materials: a comprehensive review, International Journal of Extreme Manufacturing, 5 (2023) 012003.
  • L. Zhang, Y. Sato, J. Yan: Optimization of fast tool servo diamond turning for enhancing geometrical accuracy and surface quality of freeform optics, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol.17, No.1, 2023.
  • M. Omiya, A. Nakajima, J. Yan: Design and fabrication of micro and nano surface structures for enhancing metal–polymer adhesion using femtosecond laser treatment, Materials & Design, 224 (2022) 111349.
  • W. Huang, J. Yan: Towards understanding the mechanism of vibration-assisted cutting of monocrystalline silicon by cyclic nanoindentation, Journal of Materials Processing Tech., 311 (2023) 117797.
  • L. Zhang, J. Yan: Study on nano-graphitic carbon coating on Si mold insert for precision glass molding, Surface & Coatings Technology, 448 (2022) 128893.
  • G. Esser, J. Yan: Direct Observation of Discharge Phenomena in Vibration-Assisted Micro EDM of Array Structures, Micromachines 2022, 13, 1286.
  • Y. Ueda, N. Sakurai, T. Takagi, K. Ishizu, J. Yan: Exploratory investigation of chip formation and surface integrity in ultrahigh-speed gear hobbing, CIRP Annals – Manufacturing Technology, 71 (2022), 89-92.
  • S. Gattu, J. Yan: Micro Electrical Discharge Machining of Ultrafine Particle Type Tungsten Carbide Using Dielectrics Mixed with Various Powders, Micromachines, 13 (2022), 998.
  • A. Nakajima, M. Omiya, J. Yan: Generation of micro/nano hybrid surface structures on copper by femtosecond pulsed laser irradiation, Nanomanufacturing and Metrology.
  • Y. Sato, J. Yan: Tool path generation and optimization for freeform surface diamond turning based on an independently controlled fast tool servo, International Journal of Extreme Manufacturing, 4 (2022), 025102.
  • K. Minami, K. Kobinata, J. Yan: Generation of Si@C/SiC@C core–shell nanoparticles by laser irradiation of silicon grinding waste, Nano Select.

2021

  • (Award) Y, Sato:Young Researcher Award, The 10th International Conference on Leading Edge Manufacturing in 21st Century(LEM21), 2021/11/18.
  • (Award) T. Meshram:Student Award, 2021 World Congress on Micro and Nano Manufacturing(WCMNM2021), 2021/9/23.
  • (Award) K. Minami: Outstanding Presentation Award, International Symposium on Precision Engineering and Sustainable Manufacturing(PRESM) 2021, 2021/7/23.
  • (Award) W. Huang: euspen’s 21st International Conference, HEIDENHAIN Scholarship, 2021/6.10.
  • (Award) K. Nagayama: 42th Machine Tool Technology Promotion Award for Outstanding Paper, 2021/6.
  • (Award) S. Kasai: 42th Machine Tool Technology Promotion Award for Outstanding Paper, 2021/6.
  • (Award) T. Terabayashi: JSME Medal for Outstanding Paper, 2021/4/22.
  • (Award) K. Enomoto:Excellent Presentation Award, 28th Conference of JSPE Student Member Graduation Research, 2021/3/29.
  • (Award) Y. Yamamuro:Excellent Research Award (Master), School of Integrated Design Engineering, Graduate School of Science and Technology, Keio University, 2021/3/26.

  • A. Nakajima, M. Omiya, J. Yan: Generation of micro/nano hybrid surface structures on copper by femtosecond pulsed laser irradiation, Nanomanufacturing and Metrology.
  • Y. Sato, J. Yan: Tool path generation and optimization for freeform surface diamond turning based on an independently controlled fast tool servo, International Journal of Extreme Manufacturing, 4 (2022), 025102.
  • K. Minami, K. Kobinata, J. Yan: Generation of Si@C/SiC@C core–shell nanoparticles by laser irradiation of silicon grinding waste, Nano Select.
  • A. Nakajima, J. Yan: Response of Resin Coating Films Containing Fine Metal Particles to Ultrashort Laser Pulses, International Journal of Precision Engineering and Manufacturing.
  • L. Zhang, J. Yan: Flexible fabrication of Fresnel micro-lens array by off-spindle-axis diamond turning and precision glass molding, Precision Engineering, 74 (2022) 186–194.
  • S. Tanikawa, J. Yan: Fabrication of micro-structured surface with controllable randomness by using FTS-based diamond turning, Precision Engineering, 73 (2022), 363–376.
  • W. Huang, J. Yan: Deformation behaviour of soft-brittle polycrystalline materials determined by nanoscratching with a sharp indenter, Precision Engineering, 72 (2021), 717–729.
  • Y. Kamada, J. Yan: Machinability Investigation for Cellulose Nanofiber-Reinforced Polymer Composite by Ultraprecision Diamond Turning, International Journal of Automation Technology. Vol.15 No.4, 2021.
  • L. Zhang, T. Hashimoto, J. Yan: Machinability exploration for high-entropy alloy FeCrCoMnNi by ultrasonic vibration-assisted diamond turning, CIRP Annals – Manufacturing Technology. 70 (2021) 37-40.
  • Y. Yamamuro, T. Shimoyama, J. Yan: Microscale Surface Patterning of Zirconia by Femtosecond Pulsed Laser Irradiation, International Journal of Precision Engineering and Manufacturing-Green Technology, https://doi.org/10.1007/s40684-021-00362-3.
  • W. Huang, J. Yan: Fundamental Investigation of Diamond Cutting of Micro V-Shaped Grooves on a Polycrystalline Soft-Brittle Material, Journal of Manufacturing and Materials Processing. 2021, 5, 17. https://doi.org/10.3390/jmmp5010017.
  • K. Nagayama, J. Yan: Deterministic error compensation for slow tool servo-driven diamond turning of freeform surface with nanometric form accuracy, Journal of Manufacturing Processes, 64 (2021), 45-57.
  • L. Zhang, J. Yan: Evolution of high-pressure metastable phase Si-XIII during silicon nanoindentation: A molecular dynamics study, Computational Materials Science, 191 (2021), 110344.
  • W. Huang, J. Yan: Chip-free surface patterning of toxic brittle polycrystalline materials through micro/nanoscale burnishing, International Journal of Machine Tools and Manufacture, 162 (2021), 103688.

2020

  • (Award) A. Nakajima: Best Paper Award, International Symposium on Precision Engineering and Sustainable Manufacturing(PRESM) 2020, 2020/11/18.
  • (Award) R. Teramachi: Miura Award, The Japan Society of Mechanical Engineering, 2020/3/26.
  • (Award) Y. Sato: Excellent Graduation Research Award, Department of Mechanical Engineering, Keio University, 2020/3/23.
  • (Award) Y. Sunaba: Best Paper Award, JSAT-ATF, 2020/2/28.

  • K. Kosai, J. Yan: Effects of cyclic loading on subsurface microstructural changes of zirconia polycrystals in nanoscale mechanical processing, International Journal of Machine Tools and Manufacture, 159 (2020), 103626.
  • H. Huang, Y. Qian, C. Wang, J. Yan: Laser induced micro-cracking of Zr-based metallic glass using 1011 w/m2 nano-pulses, Materials Today Communications, 25 (2020), 101554.
  • T. Zhou, Y. He, T. Wang, X. Dong, P. Liu, W.Zhao, Y. Hu, J. Yan: Algorithm of Micro-Grooving and Imaging Processing for the Generation of High-Resolution Structural Color Images, Nanomanufacturing and Metrology, https://doi.org/10.1007/s41871-020-00068-1
  • K. Nagayama, J. Yan: Measurement and Compensation of Tool Contour Error Using White Light Interferometry for Ultra-Precision Diamond Turning of Freeform Surfaces, Int. J. of Automation Technology, 14, 4 (2020) 654-664.
  • A. Teramachi, S. Tarvainen, J. Yan: Drilling of cemented carbide by ultrasonic vibration-assisted grinding on a flexible stage, Journal of the Japan Society for Abrasive Technology, 64, 6 (2020) 320-325.
  • T. Meshram, J. Yan: Generation of microcones on reaction-bonded silicon carbide by nanosecond pulsed laser irradiation, The Inaternational Journal of Advanced Manufacturing Technology, 108 (2020), 1039-1048.
  • T. Shitara, K. Fujita, J. Yan: Direct observation of discharging phenomena in vibration-assisted micro-electrical discharge machining, The International Journal of Advanced Manufacturing Technology, 108 (2020), 1125-1138.
  • T. Kobayashi, J.Yan: Generating Nanodot Structures on Stainless-Steel Surface by Cross Scanning of a Picosecond Pulsed Laser, Nanomanufacturing and Metrology, https://doi.org/10.1007/s41871-020-00063-6.
  • K. Momoki, K. Takahashi, K. Kobinata, Y. Kobayashi, A. Kawai, J. Yan: Generating Silicon Nanofiber Clusters from Grinding Sludge by Millisecond Pulsed Laser Irradiation, Nanomaterials, Vol.10 No.812, 2020.
  • W. Huang, J. Yan: Surface formation mechanism in ultraprecision diamond turning of coarse-grained polycrystalline ZnSe, International Journal of Machine Tools & Manufacture, 153 (2020), 103554.
  • X. Zhang, Y. Chueh, C. Wei, Z. Sun, J. Yan, L. Li: Additive manufacturing of three-dimensional metal-glass functionally gradient material components by laser powder bed fusion with in situ powder mixing, Additive Manufacturing, 33 (2020), 101113.
  • T. Terabayashi, J. Yan: Surface Formation Behaviors in Wavy Microgroove Cutting on Various Workpiece Materials, International Journal of Automation Technology, Vol.14 No.2, 2020.
  • S. N. Ameli Kalkhoran, M. Vahdati, Z. Zhang, J. Yan: Influence of Wax Lubrication on Cutting Performance of Single‑Crystal Silicon in Ultraprecision Microgrooving, International Journal of Precision and Manufacturing-Green Technology, https://doi.org/10.1007/s40684-020-00198-3.
  • K. Momoki, T. Manabe, L. Li, J. Yan: Silicon nanoparticle generation and deposition on glass from waste silicon powder by nanosecond pulsed laser irradiation, Materials Science in Semiconductor Processing, 111 (2020), 104998.
  • Y. Yamamuro, T. Shimoyama, I. Yamashita, J. Yan: Multiscale Surface Patterning of Zirconia by Picosecond Pulsed Laser Irradiation, Journal of Micro- and Nano-Manufacturing, 8 (2020), 010907.
  • R. Kishi, J. Yan: Electrical Discharge/Electrochemical Hybrid Machining Based on the Same Machine and Tool Electrode, Journal of Micro- and Nano-Manufacturing, 8 (2020), 010906.
  • K. Momoki, J. Yan: Nanoparticle generation from various types of silicon materials by nanosecond-pulsed laser irradiation, Applied Physics Express, 13 (2020), 026505.
  • K. Niitsu, J. Yan: Effects of deep subsurface damages on surface nanostructure formation in laser recovery of grinded single-crystal silicon wafers, Precision Engineering, 62 (2020), 213-222.
  • S. N. Ameli Kalkhoran, M. Vahdati, J. Yan: Effect of relative tool sharpness on subsurface damage and material recovery in nanometric cutting of mono-crystalline silicon: A molecular dynamics approach, Materials Science in Semiconductor Processing, 108 (2020) 104868.

  • (Review)E. Brinksmeier, B. Karpuschewski, J. Yan: Manufacturing of multiscale structured surfaces, CIRP Annals – Manufacturing Technology, 69 (2020), 717-739.
  • (Review)K. Nagayama, J. Yan: Tool contour measurement technology for ultraprecision cutting of free-form microstructured surfaces, Machines and Tools, 10, 3 (2020) 8-12.
  • (Review)P. J. Liew, C. Y. Yap, J. Wang, T. Zhou, J. Yan: Surface modification and functionalization by electrical discharge coating, International Journal of Extreme Manufacturing, 2 (2020) 012004.

2019

  • (Award) Y.Saito: Best Paper Award, 8th International Conference of ASPEN, 2019/11/14.
  • (Award) K.Kosai: Excellent Presentation Award, the 2019 Abrasive Technology Conference (ABTEC2019), 2019/11/1.
  • (Award) Qian Yu: Excellent Paper Award, The 15th Chine-Japan International Conference on Ultra-Precision Machining Process (CJUMP 2019), 2019/9/28.
  • (Award) SD.Gattu: Excellent presentations of Rank 3, 40th MATADOR International Conference on Advanced Manufacturing and Design, 2019/7/10.
  • (Award) R. Kishi: 40th Machine Tool Technology Promotion Award for Encouragement, 2019/6/17.
  • (Award) N. Takayama: Miura Award, The Japan Society of Mechanical Engineering, 2019/3/28.
  • (Award) T. Okuuchi: Best Presentation Award, The 2019 JSPE Spring Conference, 2019/3/15.
  • (Award) R. Kishi: Excellent Graduation Research Award, Department of Mechanical Engineering, Keio University, 2019/2/28.
  • (Award) R. Kishi: Best Presentation Award, JSAT-ATF 2019, 2019/2/28.
  • (Award) Y. Yamamuro: Poster Presentation Award, JSAT-ATF 2019, 2019/2/28.

  • S. Kasai, T. Sodetai J. Yan: Fabrication of polycrystalline diamond three-dimensional structures by sinking EDM using carbon diffusion reaction, Journal of the Japan Society of Electrial-machining Engineers Vol.53, (2019), No.132, 5-11.
  • T. Kurosawa, J. Yan: Electrical Discharge Machining and Grinding of SiC Single Crystal Using a Disc-type Hybrid Tool of Polycrystalline Diamond, Journal of the Japan Society of Electrial-machining Engineers Vol.53, (2019), No.132, 12-18.
  • H. Ishide, J. Yan: Study on Infrared Transmittance of Si-Polymer Hybrid Structure Press Molded Using a Coupling Agent, Journal of Automation Technology Vol.13, (2019), No.6, 817-824.
  • X. Yang, N. Tachikawa, Y. Katayama, L. Lin, J. Yan: Effect of the Pillar Size on the Electrochemical Performance of Laser-Induced Silicon Micropillars as Anodes for Lithium-Ion Batteries, Appl. Sci. 2019, 9, 3623.
  • S. N. Ameli Kalkhoran, M. Vahdati, J. Yan: Molecular dynamics investigation of nanometric cutting of single-crystal silicon using a blunt tool, JOM(2019). https://doi.org/10.1007/s11837-019-03671-w
  • A. Teramachi, J. Yan: Improving the Surface Integrity of Additive-Manufactured Metal Parts by Ultrasonic Vibration-Assisted Burnishing, Journal of Micro- and Nano-Manufacturing, JUNE 2019, Vol. 7, 024501.
  • J. Yan, T. Okuuchi: Chip morphology and surface integrity in ultrasonic cutting of yttria-stabilized tetragonal zirconia polycrystal, CIRP Annals – Manufacturing Technology, 68(2019) 53-56.
  • T. Terabayashi, J. Yan: Ultra-precision cutting of roll molds having two-directional wavy microstructures, The Japan Society of Mechanical Engineers, Vol.85, No.874 (2019).
  • P. Beiring, J. Yan: Ultrasonic vibration-assisted microgrinding of glassy carbon, Journal of Mechanical Engineering Science, Vol. 233(12) (2019), 4165-4175.
  • T. Kobayashi, T. Wakabayashi, Y. Takushima, J. Yan: Formation behavior of laser-induced periodic surface structures on stainless tool steel in various media, Precision Engineering, 57 (2019), 244-252.
  • K. Kosai, J. Yan: Direct observations of multi-cyclic nanoindentation-induced phase transformations in single-crystal Ge, Materials Research Express, 6 (2019), 075065.
  • M. Heidari, J. Akbari, J. Yan: Effects of tool rake angle and tool nose radius on surface quality of ultraprecision diamond-turned porous silicon, Journal of Manufacturing Processes, 37 (2019), 321-331.
  • K. Niitsu, Y. Tayama, T. Kato, J. Yan: Laser recovery of grinding-induced subsurface damage in the edge and notch of a single-crystal silicon wafer, Surface Topography: Metrology and Properties, 7 (2019).
  • Z. He, J. Li, Y. Liu, J. Yan: Investigation on wear modes and mechanisms of abrasive belts in grinding of U71Mn steel, International Journal of Advanced Manufacturing Technology, 101, 5–8 (2019) 1821–1835.
  • Z. He, J. Li, Y. Liu, J. Yan: Single-grain cutting based modeling of abrasive belt wear in cylindrical grinding, Friction, (2019) 1-13.
  • Y. El-Taybany, M. Hossam, J. Yan, H. El-Hofy: Surface roughness in ultrasonic-assisted and conventional milling of soda-lime glass, International Journal of Machining and Machinability of Materials, 21, 1/2 (2019) 82-99.

  • (Review)T. Urushibata, H. Ishida, Y. Sugiyama, T. Wakabayashi, Y. Takushima, J. Yan: Surface smoothing of additive manufactured alloy by multiple laser processes, Journal of Japan Laser Processing Society, 26, 2 (2019) 44-46.
  • (Review) J. Yan: Planarization and LIPSS formation on steel surface by picosecond pulsed laser irradiation, Mechanical Engineering, 67, 8 (2019) 26-30.
  • (Review) T. Wakabayashi, T. Urushibata, T. Kobayashi, J. Yan: Laser hybrid process for surface smoothing of mold materials, Die and Mould Technology, 34, 4 (2019) 22-25.
  • (Review)Z. Zhang, J Yan, T. Kuriyagawa: Manufacturing technologies toward extreme precision, International Journal of Extreme Manufacturing, 1 (2019) 022001.
  • 0

2018

  • (Award) N. Takayama: International PhD Academic Forum on Intelligent Manufacturing (IPAFIM 2018), Best Presentation Award, 2018/10/26.
  • (Award) K. Nagayama: The 14th Chine-Japan International Conference on Ultra-Precision Machining Process (CJUMP 2018), Best Paper Award and Young Researcher Award, 2018/9/15.
  • (Award) K. Kousai: The 4th CIRP Conference on Surface Integrity (CIRP CSI 2018), Best Paper Award, 2018/7/13.
  • (Award) J. Ishizuka: Mazak Foundation Best Paper Award, 2018/4/6.
  • (Award) M. Heidari: JSPE Young Researcher Award, 2018/3/16.
  • (Award) T. Suzuki: JSPE Takagi Award, 2018/3/16.
  • (Award) S. Araki, H. Ishide, K. Nagayama: Excellent Presentation Award, 25th Conference of JSPE Student Member Graduation Research, 2018/3/15.

  • Y. Sunaba, N.Tachikawa, Y. Katayama, J. Yan: Fabrication of porous composite by high-pressure sintering of silicon cutting chips and metal particles, Journal of the Japan Society for Abrasive Technology, 62, 11 (2018), 584-588.
  • T. Kobayashi, H. Sera, T. Wakabayashi, H. Endo, Y. Takushima, J. Yan: Surface Flattening and Nanostructuring of Steel by Picosecond Pulsed Laser Irradiation, Nanomanufacturing and Metrology, (2018).
  • H. Huang, M. Jiang, J. Yan: The coupling effects of laser thermal shock and surface nitridation on mechanical properties of Zr-based metallic glass, Journal of Alloys and Compounds, 770 (2019), 864-874.
  • H. Huang, J. Yan: Multi-scale dimple creation on metallic glass by a two-step method involving nanoindentation and polishing, Applied Surface Science, 462 (2018), 565–574.
  • J. Yan, Y. Imoto: Nanoscale surface patterning of diamond utilizing carbon diffusion reaction with a microstructured titanium mold, CIRP Annals – Manufacturing Technology, 67 (2018), 181–184.
  • N. Takayama, J. Ishizuka, J. Yan: Microgrooving of a single-crystal diamond tool using a picosecond pulsed laser and some cutting tests, Precision Engineering, 53 (2018), 252–262.
  • N. Takayama, S. Asaka, J. Yan: Nanosecond pulsed laser irradiation of sapphire for developing microstructures with deep V-shaped grooves, Precision Engineering, 52 (2018), 440–450.
  • M. Heidari, J. Yan: Material removal mechanism and surface integrity in ultraprecision cutting of porous titanium, Precision Engineering, 52 (2018), 356–369.
  • K. Niitsu, Y. Tayama, T. Kato, H. Maehara, J. Yan: Characterization of recrystallized depth and dopant distribution in laser recovery of grinding damage in single-crystal silicon, Materials Science in Semiconductor Processing, 82 (2018), 54–61.
  • Q. Wang, F. Zhou, Q. Ma, M. Callisti, T. Polcar, J. Yan: Fracture toughness and sliding properties of magnetron sputtered CrBC and CrBCN coatings, Applied Surface Science, 443 (2018), 635–643.
  • J. Ishizuka, K. Nagasawa, M. Mikami, J. Yan: Ultraprecision cutting of fluoride glass – Fundamental investigation on surface formation and tool damage -, Journal of the Japan Society for Abrasive Technology, 62, 2 (2018) 88-93.
  • R. Komiya, T. Kimura, T. Nomura, M. Kubo, J. Yan: Ultraprecision cutting of single-crystal calcium fluoride for fabricating micro flow cells, Journal of Advanced Mechanical Design,Systems,and Manufacturing, 12, 1 (2018).
  • T. Suzuki, T. Otsuki, J. Yan: Precision slicing of single-crystal SiC using extremely fine fixed-abrasive diamond wire, Bulletin of the JSME, 84, 857 (2018).
  • M. Heidari, J. Yan: Nanometer-scale chip formation and surface integrity of pure titanium in diamond turning, International Journal of Advanced Manufacturing Technology, 95 (2018), 479-492.

  • (Review) J. Yan: Machining-induced Subsurface Damage in Single-crystal Silicon – Formation, Characterization, and Recovery, Journal of the Japan Society for Precision Engineering, 84, 12 (2018) 971-974.
  • (Review) T. Urushibata, T. Wakabayashi, Y. Takushima, J. Yan: Hybrid laser process for tool steel surface smoothing, Optical Alliance, 29, 11 (2018) 45-49.
  • (Review) J. Yan: Defect recovery and surface integrity control for single-crystal silicon by laser irradiation, Journal of the Japan Society of Laser Technology, 42, 3 (2018) 16-21.
  • (Review) J. Yan: Nano-Scale Machining of Single-Crystal Diamond by Thermo-Chemical Reaction, Chemical Industry, 69, 5 (2018) 33-39.

2017

  • (Award) T. Terabayashi: The 13th China-Japan International Conference on Ultra-Precision Machining Process (CJUMP2017), Best Paper Award, 2017/11/22.
  • (Award) N. Takayama: The 9th International Conference on Leading Edge Manufacturing for 21st Century (LEM21), Best Presentation Award, 2017/11/16.
  • (Award) N. Takayama: Poster Presentation Award, The 2017 JSPE Autumn Meeting, 2017/9/22.
  • (Award) T. Kurosawa: 38th Machine Tool Technology Promotion Award for Encouragement, 2017/6/19.
  • (Award) N. Takayama: Best Student Paper Presentation Award, World Congress on Micro and Nano Manufacturing (WCMNM2017), 2017/3/30.
  • (Award) N. Takayama: Keio Kougakukai Award, Keio University, 2014/3/22.
  • (Award) N. Takayama: Fujiwara Award, Faculty of Science and Technology, Keio University, 2017/3/23.
  • (Award) Y. Imoto: Best Presentation Award, The 2017 JSPE Spring Conference, 2017/3/15.
  • (Award) J. Ishizuka: Most Commendable Presentation Award, 24th Conference of JSPE Student Member Graduation Research, 2017/3/13.
  • (Award) N. Takayama: Best Presentation Award, JSAT-ATF 2017, 2017/3/3.
  • (Award) T. Okuuchi: Poster Presentation Award, JSAT-ATF 2017, 2017/3/3.

  • K. Kosai, H. Huang, J. Yan: Comparative Study of Phase Transformation in Single-Crystal Germanium during Single and Cyclic Nanoindentation, Crystals, 7 (2017), 333.
  • M. Mukaida, J. Yan: Fabrication of Hexagonal Microlens Arrays on Single-Crystal Silicon Using the Tool-Servo Driven Segment Turning Method, Micromachines, 8 (2017), 323.
  • H. Huang, J. Yan: Investigating shear band interaction in metallic glasses by adjacent nanoindentation, Materials Science & Engineering A, 704 (2017), 375-385.
  • T. Suzuki, Y. Nishino, J. Yan: Mechanisms of material removal and subsurface damage in fixed-abrasive diamond wire slicing of single-crystalline silicon, Precision Engineering, 50 (2017), 32-43.
  • N. Takayama, J. Yan: Laser Irradiation Responses of a Single-Crystal Diamond Produced by Different Crystal Growth Methods, Applied Sciences, 7 (8), 815 (2017).
  • Y. Imoto, J. Yan: Fabrication of Microstructures on Single-crystal Diamond by Press Imprinting Utilizing Pure Iron Molds, Journal of the Japan Society for Precision Engineering, 83, 8 (2017) 770-774.
  • J. Yan, J. Noguchi, Y. Terashi,: Fabrication of single-crystal silicon micro pillars on copper foils by nanosecond pulsed laser irradiation, CIRP Annals – Manufacturing Technology, 66 (2017) 253-256.
  • M. Matsumoto, H. Huang, H.Harada, K.Kakimoto and J. Yan: On the phase transformation of single-crystal 4H–SiC during nanoindentation, Journal of Physics D: Applied Physics, 50 (2017) 265303.
  • H. Huang and J. Yan: Surface patterning of Zr-based metallic glass by laser irradiation induced selective thermoplastic extrusion in nitrogen gas, Journal of Micromechanics and Microengineering, 27 (2017) 075007.
  • M. Heidari and J. Yan: Ultraprecision surface flattening of porous silicon by diamond turning, Precision Engineering, 49 (2017) 262-277.
  • M. Heidari and J. Yan: Fundamental characteristics of material removal and surface formation in diamond turning of porous carbon, International Journal of Additive and Subtractive Materials Manufacturing, 1 (2017) 23-41.
  • M. Mukaida and J. Yan: Ductile machining of single-crystal silicon for microlens arrays by ultraprecision diamond turning using a slow tool servo, International Journal of Machine Tools & Manufacture, 115 (2017) 2-14.
  • N. Takayama, J. Yan: Mechanisms of micro-groove formation on single-crystal diamond by a nanosecond pulsed laser, Journal of Materials Processing Technology, 243 (2017) 299-311.
  • A. R. Abdul Manaf, T. Sugiyama, J. Yan: Design and fabrication of Si-HDPE hybrid Fresnel lenses for infrared imaging systems, Optics Express, 25 (2017) 1202.
  • Y. Imoto, J. Yan: Thermochemical micro imprinting of single-crystal diamond surface using a nickel mold under high-pressure conditions, Applied Surface Science, 404 (2017) 318-325.
  • A. R. Abdul Manaf, J. Yan: Improvement of form accuracy and surface integrity of Si-HDPE hybrid micro-lens arrays in press molding, Precision Engineering, 47 (2017) 469-479.
  • T. Tan, J. Yan: Atomic-scale characterization of subsurface damage and structural changes of single-crystal silicon carbide subjected to electrical discharge machining, Acta Materialia, 123 (2017) 362-372.
  • J. Wang, L. Wan, J. Chen, J. Yan: Micropatterning of diamond crystallites via cobalt-catalyzed thermochemical etching, Journal of Material Science, 52 (2017) 709-720.

  • (Review) J. Yan: Free-form surface generation on hard-brittle materials by slow tool servo cutting, Mechanical Engineering, 65, 10 (2017) 72-75.
  • (Review) P. J. Liew, A. Shaaroni, N. A. C. Sidik, J. Yan: An overview of current status of cutting fluids and cooling techniques of turning hard steel, International Journal of Heat and Mass Transfer, 114 (2017) 380-394.

2016

  • (Award) M. Mukaida, T. Okuuchi: The 17th International Machine Tool Engineers’ Conference, Excellent Poster Award, 2016/11/20.
  • (Award) T. Yamazaki: The 12th China-Japan International Conference on Ultra-Precision Machining Process (CJUMP2016), Young Researcher Award, 2016/11/06.
  • (Award) T. Yamazaki: JSAT Excellent Presentation Award 2016, 2016/10/24.
  • (Award) K. Kousai: Excellent Presentation Award, 23th Conference of JSPE Student Member Graduation Research, 2016/3/15.
  • (Award) Y. Shimamoto: Poster Session Award, JSAT-ATF 2016, 2016/3/4.

  • T. Yamazaki, J. Yan: High-precision micro-grooving of CFRP by ultrasonic vibration-assisted grinding, Journal of the Japan Society for Abrasive Technology, 60, 12 (2016) 659-664.
  • H. Huang, J. Noguchi, J. Yan: Shield gas induced cracks during nanosecond-pulsed laser irradiation of Zr-based metallic glass, Applied Physics A, 122, 10 (2016) 881.
  • H. Huang, J. Yan: Microstructural changes of Zr-based metallic glass during micro-electrical discharge machining and grinding by a sintered diamond tool, Journal of Alloys and Compounds, 688 (2016) 14-21.
  • H. Huang, J. Noguchi, M. Jiang, R. Moriya, J. Yan: Nanosecond pulsed laser irradiation induced hierarchical micro/nanostructures on Zr-based metallic glass substrate, Materials & Design, 109 (2016) 153-161.
  • W. Wang, P. Yao, J. Wang, C. Huang, H. Zhu, B. Zou, H. Liu, J. Yan: Crack-free ductile mode grinding of fused silica under controllable dry grinding conditions, International Journal of Machine Tools and Manufacture, 109 (2016) 126-136.
  • C. Liu, J. Yan, and S. Lin: Diamond turning of high-precision roll-to-roll imprinting molds for fabricating subwavelength gratings, Optical Engineering, 55(6) (2016) 064105.
  • J. Yan, K. Okada: Fabrication of silicon-based porous nanocomposite films by focused infrared light sintering, CIRP Annals-Manufacturing Technology, 65 (2016) 217-220.
  • J. Wang, L. Wan, J. Chen, J. Yan: Surface patterning of synthetic diamond crystallites using nickel powder, Diamond & Related Materials, 66 (2016) 206-212
  • H. Huang, J. Yan: Volumetric and timescale analysis of phase transformation in single-crystal silicon during nanoidentation, Applied Physics A – Material Science & Processing, 122, 607 (2016) 1-11.
  • H. Huang, J. Zhang, C. Shek, J. Yan: Effects of pre-compression deformation on nanoindentation response of Zr65Cu15Al10Ni10 bulk metallic glass, Journal of Alloys and Compounds, 674 (2016) 223-228.
  • H. Huang, J. Yan: In situ characterization of formation and growth of high-pressure phases in single-crystal silicon during nanoindentation, Applied Physics A – Material Science & Processing, 122, 409 (2016) 1-7.
  • T. Suzuki, T. Otsuki, J. Yan: Precision slicing of single-crystal silicon using a dicing wire saw, Journal of the Japan Society for Abrasive Technology, 60, 2 (2016) 97-103.
  • Z. Wu, F. Zhou, K. Chen, Q. Wang, Z. Zhou, J. Yan, L. K.-Y. Li: Microstructure, mechanical and tribological properties of CrSiC coatings sliding against SiC and Al2O3 balls in water, Applied Surface Science, 368 (2016) 129-139.
  • Z. Wu, F. Zhou, K. Chen, Q. Wang, Z. Zhou, J. Yan, L. K. Y. Li: Friction and wear properties of CrSiCN coatings with low carbon content as sliding against SiC and steel balls in water, Tribology International, 94 (2016) 176-186.
  • Q. Wang, F. Zhou, J. Yan: Evaluating mechanical properties and crack resistance of CrN, CrTiN, CrAlN and CrTiAlN coatings by nanoindentation and scratch tests, Surface and Coatings Technology, 285 (2016) 203-213.
  • A. R. Abdul Manaf, J. Yan: Press Molding of a Si-HDPE Hybrid Lens Substrate and Evaluation of Its Infrared Optical Properties, Precision Engineering, 43 (2016) 429-438.

  • (Review) Effects of ultrasonic vibration on grinding/drilling of CFRP, T. Yamazaki, J. Yan, Ultrasonic Technology; 28, 6 (2016) 8-12.
  • (Review) Fabrication of Li-ion Battery Electrodes by Laser Sintering of Waste Silicon Powders; J. Yan ; Journal of Japan Laser Processing Society; 23, 1 (2016) 72-75.

2015

  • (Award) M.Mukaida: The 11th China-Japan International Conference on Ultra-Precision Machining Process (CJUMP2015), Young Researcher Award, 2015/11/27.
  • (Award) K. Okada: JSAT Excellent Presentation Award 2015, 2015/11/13.
  • (Award) Ahmad Rosli: The 8th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Best Paper Award, 2015/10/20.
  • (Award) M.Mukaida: 36th Machine Tool Technology Promotion Award for Encouragement, 2015/6/22.
  • (Award) M.Mukaida: euspen’s 15th International Conference & Exhibtion – HEIDENHAIN Scholarship, Leuven, Belgium, 2015/06/03.
  • (Award) J. Noguchi: Excellent Graduation Research Award, Department of Mechanical Engineering, Keio University, 2015/3/23.
  • (Award) M. Mukaida: Excellent Presentation Award, 22th Conference of JSPE Student Member Graduation Research, 2015/3/17.
  • (Award) T. Yamazaki: Poster Session Award, JSAT-ATF 2015, 2015/3/6.

  • T. Yamazaki, J. Yan: High-precision drilling of CFRP by ultrasonic vibration-assisted grinding, Journal of the Japan Society for Abrasive Technology, 59, 12 (2015) 699-704.
  • H. Huang, J. Yan: Possibility for rapid generation of high-pressure phases in single-crystal silicon by fast nanoindentation, Semiconductor Science and Technology, 30 (2015) 115001.
  • K. Asakura, J. Yan: Water Repellency Control of Oxygen-Free Copper Surface by Diamond-Cut Micro Grooves, International Journal of Automation Technology, 9 (2015) 396-402.
  • H. Huang, J. Yan: On the surface characteristics of a Zr-based bulk metallic glass processed by microelectrical discharge machining, Applied Surface Science, 355 (2015) 1306-1315.
  • Q. Wang, Z. Wu, F. Zhou, J. Yan: Comparison of crack resistance between ternary CrSiC and quaternary CrSiCN coatings via nanoindentation, Materials Science and Engineering: A, 642 (2015) 391-397.
  • H. Huang, J. Yan: On the mechanism of secondary pop-out in cyclic nanoindentation of single-crystal silicon, Journal of Materials Research, 30, 11 (2015) 1861-1868.
  • J. Yan, T. H. Tan: Sintered diamond as a hybrid EDM and grinding tool for the micromachining of single-crystal SiC, CIRP Annals – Manufacturing Technology, 64, 1 (2015) 221-224.
  • J. Wang, L. Wan, J. Chen, J. Yan: Anisotropy of synthetic diamond in catalytic etching using iron powder, Applied Surface Science, 346 (2015) 388-393.
  • Q. Wang, Z. Wu, F. Zhou, H. Huang, K. Niitsu, J. Yan: Evaluation of crack resistance of CrSiCN coatings as a function of Si concentration via nanoindentation, Surface and Coatings Technology, 272 (2015) 239-245.
  • Z. Wu, F. Zhou, Q. Wang, Z. Zhou, J. Yan, L. K. Y. Li: Influence of trimethylsilane flow on the microstructure, mechanical and tribological properties of CrSiCN coatings in water lubrication, Applied Surface Science, 355 (2015) 516-530.
  • Q. Wang, F. Zhou, C. Wang, M. F. Yuen, M. Wang, T. Qian, M. Matsumoto, J. Yan: Comparison of tribological and electrochemical properties of TiN, CrN, TiAlN and a-C:H coatings in simulated body fluid, Materials Chemistry and Physics, (2015) 74-81.
  • H. Huang and J. Yan: New insights into phase transformations in single crystal silicon by controlled cyclic nanoindentation, Scripta Materialia, 102 (2015) 35-38.
  • Q. Wang, F. Zhou, S. Gao, Z. Zhou, L. K. Y. Li, J. Yan: Effect of counterparts on the tribological properties of TiCN coatings with low carbon concentration in water lubrication, Wear, 328–329 (2015) 356-362.
  • S. Azami, H. Kudo, Y. Mizumoto, T. Tanabe, J. Yan, Y. Kakinuma: Experimental study of crystal anisotropy based on ultra-precision cylindrical turning of single-crystal calcium fluoride, Precision Engineering, 40 (2015) 172-181.
  • Q. Wang, F. Zhou, Z. Zhou, L. K. Y. Li, J. Yan: Influence of carbon concentration on the electrochemical behavior of CrCN coatings in simulated body fluid, Surface and Coatings Technology, 265 (2015) 16-23.
  • Y. Iwabuchi and J. Yan: Laser sintering of silicon powder and carbon nanofibers for porous composite thick films, Applied Physics Express, 8 (2015) 026501.
  • T. Kidokoro, J. Yan: High-precision press sintering for porous silicon-carbon conposite thick films, Journal of the Japan Society for Abrasive Technology, 59, 1 (2015) 23-26.
  • T. Zhou, J. Yan, Z. Liang, X. Wang, R. Kobayashi, T. Kuriyagawa: Development of polycrystalline Ni–P mold by heat treatment for glass microgroove forming; Precision Engineering, 39, 1 (2015) 25-30.

  • (Review) Micro Machining of Diamond by Utilizing Carbon Diffusion; J. Yan ; NEW DIAMOND; 31, 4 (2015) 11-14.
  • (Review) Ultraprecision cutting of optical crystals and evaluation of surface integrity; J. Yan ; Optical and Electro-Optical Engineering Contact; 53, 11 (2015) 27-35.
  • (Review) Ductile mode cutting of tungsten carbide and reaction-bonded SiC; J. Yan ; Journal of the Japan Society for Abrasive Technology, 59, 8 (2015) 6-9.

2014

  • (Award) K. Niitsu: JSME Manufacturing and Machine Tool Award for Outstanding Presentation, 2014/11/15.
  • (Award) K. Watanabe: American Society for Precision Engineering (ASPE) Student Scholarship 2014, 2014/11/11.
  • (Award) T. Kidokoro: JSAT Excellent Presentation Award 2014, 2014/10/24.
  • (Award) Y. Iwabuchi: The 15th International Conference on Precision Engineering (ICPE2014) Best Paper Award, 2014/7/24.
  • (Award) K. Watanabe: 35th Machine Tool Technology Promotion Award for Encouragement, 2014/6/23.
  • (Award) Y. Murata: Smart Processing Society Best Paper Award, 2014/05/19.
  • (Award) K. Niitsu: Excellent Graduation Research Award, Department of Mechanical Engineering, Keio University, 2014/3/22.
  • (Award) K. Watanabe: Kito Award, Department of Mechanical Engineering, Keio University, 2014/3/22.
  • (Award) K. Okada: Poster Session Award, JSAT-ATF 2014, 2014/3/7.
  • (Award) M. Matsumoto: Poster Session Award, JSAT-ATF 2014, 2014/3/7.

  • Development of polycrystalline Ni–P mold by heat treatment for glass microgroove forming; T. Zhou, J. Yan, Z. Liang, X. Wang, R. Kobayashi, T. Kuriyagawa; Precision Engineering, Vol.39/No.1/P.25-30 (2015).
  • Effects of Element Doping in Ultra-Precision Diamond Turning of Single-Crystal Silicon Y. Kusunoki, J. Yan; Journal of the Japan Society for Abrasive Technology, Vol.58/No.11/P. 699-704 (2014).
  • Electrochemical performance of TiCN coatings with low carbon concentration in simulated body fluid; Q. Wang, F. Zhou, Z. Zhou, L.K.Y. Li, J. Yan; Surface and Coatings Technology, Vol.253/P.199-204 (2014).
  • Micro-electrical discharge machining of polycrystalline diamond using rotary cupronickel electrode; J. Yan, K. Watanabe, T. Aoyama; CIRP Annals – Manufacturing Technology ; Vol.63/No.1/P.209-212 (2014).
  • Nanoindentation of polysilicon and single crystal silicon: Molecular dynamics simulation and experimental validation; S. Goel, N. Faisal, X. Luo, J. Yan, A. Agrawal; Journal of Physics D: Applied Physics, Vol.47/275304/P. 1-14 (2014).
  • Incipient plasticity in 4H-SiC during quasistatic nanoindentation; S. Goel, J. Yan, X. Luo, A. Agrawal; Journal of the Mechanical Behavior of Biomedical Materials , Vol.34/P.330-337 (2014).
  • Fabrication of Deep Micro Holes in Reaction-Bonded SiC by Ultrasonic Cavitation Assisted Micro EDM ; P. J. Liew, J. Yan, T. Kuriyagawa ; International Journal of Machine Tools and Manufacture ; Vol.76/P.13-20 (2014).

  • (Review) Laser processing for generation of functional surfaces; J. Yan ; Laser (Journal of the Japan Society of Laser Technology); Vol.39 /No.2 /37-40 (2014).
  • (Review) Precision machining technologies for next-generation industry; J. Yan ; Mould Technology ; Vol.29/No.5/018-021 (2014).
  • (Review) Ultraprecision cutting technology for semiconductors and optical crystals; J. Yan ; Mechanical Engineering ; Vol.62/No.1/P.31-35 (2014).